
In many small offices every device shares one network: computers, printers, the visitor’s phone, the CCTV recorder and the smart TV in the meeting room. It works, until one of those devices is compromised. On a flat network, whatever gets in can reach everything else.
What segmentation means
Network segmentation is the practice of dividing a network into smaller parts and controlling the traffic that flows between them. Each part, or segment, contains devices with a similar job and a similar level of trust. Rules at the boundary decide what may cross.
The aim is to limit sideways movement. If a camera or a guest laptop is infected, the problem stays inside its own segment instead of spreading to the accounts computer.
How VLANs do it
A VLAN, or virtual LAN, lets one physical switch behave like several separate switches. Ports and Wi-Fi networks are assigned to a VLAN, and devices in different VLANs cannot talk to each other directly. Traffic between VLANs has to pass through a router or firewall, and that is where you apply the rules.
VLANs need managed or smart switches. An unmanaged switch simply forwards everything and cannot keep segments apart.
A sensible starting layout
| Segment | What lives there | What it may reach |
|---|---|---|
| Staff | Office computers and laptops | Internet, printers, servers |
| Servers and storage | File server, NAS, accounting system | Only what staff need from it |
| Voice | IP phones | The phone system and its provider |
| CCTV | Cameras and the recorder | The recorder only, plus remote viewing |
| Guests | Visitor devices | Internet only |
| Management | Switches, access points, firewall | Administrators only |
Four to six segments are enough for most small sites. More than that becomes hard to manage without bringing much extra protection.
Steps to put it in place
- List every device and decide which group it belongs to.
- Give each group its own VLAN and its own IP range. Our subnet calculator helps you split an address range.
- Create a separate Wi-Fi name for guests and map it to the guest VLAN.
- Write firewall rules that start by blocking traffic between segments, then allow only what is needed.
- Document the layout and test it: a guest device should not be able to open the recorder or a shared folder.
Common mistakes
- Creating VLANs but leaving the firewall to allow everything between them.
- Leaving switch and access point management reachable from the guest network.
- Forgetting printers and screens, which staff and sometimes guests need to reach through a specific rule.
Segmentation is also the first practical step towards a zero trust approach, in which nothing is trusted simply because of where it is plugged in. If you would like a layout designed for your site, talk to an engineer.
References
- What is network segmentation? (Cisco)
- Managed switches vs unmanaged switches (Cisco)
- How to set up guest Wi-Fi (Cisco)
- What is zero trust? (Cisco)
General information, checked against the sources above (vendor documents, standards bodies and official guidance). Not professional advice. ARNSEC is independent; product names belong to their owners.
Last updated: . Articles are checked against trusted sources (vendor documentation, standards bodies and government guidance). General information only, not professional advice.