Networking

Office Wi-Fi planning: a practical guide

2 min read 2 views

Good office Wi-Fi is mostly good planning. A single strong router in a corner will cover the room it sits in and struggle everywhere else. These are the steps we follow before we place a single access point.

Start with how people work

List how many people work in each area and what they do. Video calls, cloud software and large file transfers need far more from Wi-Fi than email and browsing. Count laptops, phones, printers and screens, because every device competes for the same airtime.

Plan coverage from a floor plan

Mark meeting rooms, open desks and any area where people gather. Walls, glass, lifts and metal shelving all weaken the signal. Plan for several access points at modest power instead of one at full power, and mount them on the ceiling in the middle of the areas they serve.

A common design target is a signal of about -67 dBm or better wherever people take calls. Coverage from neighbouring access points should overlap slightly, so that a call continues as someone walks across the office.

Wire every access point

Run a cable to each access point and power it from a PoE switch. Wired connections carry traffic far better than wireless repeaters. Newer access points can move more than one gigabit, so Cat6A cable and multi-gigabit switch ports are worth considering for them.

Choose bands and channels with care

Use the 5 GHz band for most devices and keep 2.4 GHz for older equipment and simple sensors. Wi-Fi 6E and Wi-Fi 7 can also use the 6 GHz band where local regulations allow it. Neighbouring access points should not share a channel, and moderate channel widths work better than the widest setting in a busy office.

Keep guests and staff apart

Give visitors their own Wi-Fi network on a separate segment with internet access only. Use WPA3 where your devices support it, and never share the staff password with visitors.

Test before you sign off

Walk the whole site with a laptop or a survey app, checking speed and signal in every room, and move between access points while on a call to confirm that roaming works. Fix weak spots while the installers are still on site.

References

General information, checked against the sources above (vendor documents, standards bodies and official guidance). Not professional advice. ARNSEC is independent; product names belong to their owners.

Last updated: . Articles are checked against trusted sources (vendor documentation, standards bodies and government guidance). General information only, not professional advice.

Keep reading