Roadmap
Network Technician Roadmap
A step-by-step path into hands-on network work: cabling, setup, fault finding and first certificates.
0 of 6 steps done
Your ticks are saved only in this browser. We do not see them.
-
Learn the basics
What a network is, the main devices (switch, router, access point, firewall), IP addresses and how Ethernet and Wi-Fi carry data.
-
Get hands-on with cabling and hardware
Copper and fibre cable, patch panels, labelling, testing a cable run, and powering devices over Ethernet. Learn basic electrical and working-at-height safety from your employer or a local safety course.
-
Learn to find and fix common faults
Use the layers to narrow a problem down: cable, link, address, name, application. Practise ping, traceroute and reading simple device status.
-
Set up small networks
Office Wi-Fi, small switches, VLAN basics and CCTV networks. Keep notes and a diagram of everything you build.
-
Consider an entry-level certificate
Cisco lists entry-level certifications, including CCST Networking and the Cisco Certified Field Technician (CCT). Vendor-neutral options also exist. A certificate is optional; practical skill matters.
-
Move toward network engineer
When cabling and basic support feel easy, start on routing and switching in depth.